300型鐵芯橫剪線

300型矽鋼片橫剪線（硅鋼片橫剪線）
    江陰如一科技發展有限公司生產的矽鋼片數控橫剪線，采用臺灣臺達和東元的伺服電機以及PLC,以數控全電動的方式剪切加工矽鋼片。該設備一經使用便獲得用戶好評，在加工精度上大大的提高了鐵芯橫剪線行業標準，模具采用進口鎢鋼作為刃口，沖針采用全鎢鋼磨制有效地將剪切沖孔的加工次數提高數倍，在剪切無取向矽鋼片時能夠達到500萬剪切次才需要研磨刃口，提高產能節約平時經常更換模具的時間，而且能夠節約因模具損耗而產生的費用。將模具的使用壽命利用到最大化。
    針對硅鋼片材料加工鐵芯要求不同長度的特點利用程序自動調節，只要將需要的長度輸入就可以獲得準確的尺寸，同時也可以對因送料輥精確度的誤差而進行補償，以達到最佳效果。

300 Iron Core CNC Traverse Cutting Devices use the servo electric motors and PLC of Taida and Dongyuan of Taiwan, and cut and process the silicon steel sheet by fully-electric numerical control. When the device was first put into operation, it won broad accolade from the users. It has significantly promoted the industrial standard for the transverse cutting line of iron cores. The imported tungsten steel is used on the blade of the machining tool, and the punching needles are fully made of tungsten steel, effectively promoting the number of cutting and punching for times. When cutting the silicon steel sheet without orientation, it will be 5 million times cutting before the blade needs sharpening. It can save both the time for frequent replacement of the machining tools and the expenses wasted on the frequently replaced blades.  It has maximized the service life of the machining tools.
Automatic adjustment will be made by the programs according to different requirements and lengths of the silicon steel materials. Input of your desired length will give you the accurate size. At the same time, compensation can be made up for errors of the precision of feed rolls as to achieve the best results.